Swimming Pool Calcium Hardness Increaser

APPLICATION INSTRUCTIONS:

1.      Before applying the product it should be pre-dissolved in a clean plastic container at a maximum rate of 100g of products to 10ltrs of cold fresh water. Stir well to ensure the product is fully dissolved. Repeat application to achieve the total dose required. It is recommended that the total treatment is split into three equal applications with a minimum of 8 hours between them.

2.      After pre-dissolving add the resulting solution into the pool near the inlets with the filtration system in operation.

3.      Following the application the pool water may become cloudy so keep the filtration pump running continuously until it clears.

4.      After treatment check the pH level and if necessary adjust.